Automatic Thermogravimetric Analyzer LD-LTGA-A11
SKU: LD-LTGA-A11Automatic Thermogravimetric Analyzer LD-LTGA-A11 is a high performance, efficient unit designed to study decomposing process, adsorption and desorption, oxidation and reduction, ingredients quantitative analysis, moisture and volatiles, reaction kinetics of materials. It has Built-in gas flow meter, includes two-way gas and controlled flow volume. It has top-opening structure, easy to operate. Heat insulation for heating furnace body, chassis and micro-thermal balance.
- ✓ 7 inch LCD touch screen. TG calibration can be achieved on the touch screen
- ✓ Furnace body is heated by double-row winding of precious metal nickel-cadmium alloy wire
- ✓ Tray sensor is made of precious metal alloy wire which is temperature, oxidation and corrosion resistant
- ✓ Uses imported ARM processor for faster sampling speed, processing speed
- ✓ Four-channel sampling AD collects TG signal and temperature T signal
- ✓ Multi-stage heating and constant temperature
- ✓ USB two-way communication is adopted between the software and the instrument
- ✓ Parameter settings, operation and to stop working of the instrument can be done through the computer software
Also available in:
Temperature range : Room temperature to 1000 ºC
| Power | AC220V 50Hz |
| Software | Record TG curves automatically, Processing data and print |
| Sensitivity | 0.01 mg |
| Cooling Time | 15 min (1000°C to 100°C), Natural cooling |
| Heating Rate | 0.1 to 100 °C / min |
| Data Interface | USB interface |
| Temperature Range | Room temperature to 1150 °C |
| External Dimension | 500 x 400 x 430 mm |
| Temperature Resolution | 0.01°C |
| Balance Measuring Scope | 1mg to 3g , Can be expanded to 50g |
| Temperature Fluctuation | ±0.01°C |
| Temperature Control Mode | Rising temperature, Constant temperature |
| Constant Temperature and Time | 0 to 300 min (set arbitrarily) |
Widely used in the research and development, process optimization and quality control of plastics, rubber, coatings, pharmaceuticals, catalysts, inorganic materials, metal materials and composite materials.
Similar Products
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
