Density Tester LD-LDMT-A10
SKU: LD-LDMT-A10LabodamLD-LDMT-A10density tester is simple and compact. The control box adopts humanized design and the control switch adopts light-touch mode. The instrument is designed and made as per ASTM D1298 “Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter Methods)â€.
- ✓ Fast control rate and small over-shoot
- ✓ Adopts intelligent LCD temperature controller
- ✓ Unvarying vessel temperature
- ✓ Easy to operate and observe the sample
- ✓ Refrigeration device (Optional)
Also available in:
Cubage of bath : Ф300 × 380 mm
| Thermometer | Total immersion mercury thermometer |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Heating power | 700 W; 1000 W |
| Cubage of bath | Ф300 × 380 mm |
| Scale division | 0.2 °C |
| Temperature sensor | Industrial platinum resistance, Pt100 |
| Temperature controlling range | 0 °C ~ 100 °C |
| Temperature controlling accuracy | ± 0.2 °C |
It is used to determine the density of crude petroleum and liquid petroleum.
Similar Products
Ash Content Tester LACT-A10
✓ Controlled temperature : 775 ±25 ℃
✓ Temperature rising time of empty chamber : ≤ 50 min
Mercaptan Sulfur Tester LMST-A10
✓ Potential measuring range : (0 to ±1999.5) Mv
✓ Intrinsic error : 0.1 % ±0.5 mV
Interfacial Tension Tester LIT-A10
✓ Repeatability 0.3% Resolution 0.1 mN/m Sensitivity 0.1 mN/m Accuracy 0.1 mN/m
Water Soluble Acid and Alkali Tester LAAT-A10
✓ Graduated flask : 100 ml，50 ml
✓ Conical flask : 100ml
Acid Number and Acidity Tester LAAT-A11
✓ Ambient temperature : ≤ 35 °C
✓ Relative humidity : ≤ 85 %
