Type II Water Purification System LD-LTWP-A13
SKU: LD-LTWP-A13Type II Water Purification System LTWP -A13 is a 80 L capacited modular design which meets the needs of basic laboratory water purifier. It provides Type II level water with consistency and reliability with a TOC level of < 20 ppb. Remove approximately 98% of inorganic ions and 99% of all dissolved organic substances.This system produce and reject water at the same time. Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance.
- ✓ Advanced Single Pass reverse osmosis system for excellent water quality
- ✓ Equipped with 80 L water holding tank
- ✓ Type II level water produced TOC level < 20 ppb
- ✓ Source of inlet water – Tap water
- ✓ Floor Standing model
- ✓ LCD display to monitor the intake of water pressure and various parameters intuitively
- ✓ Anti-fouling RO membrane prevention programme
- ✓ Online monitoring of water resistance
- ✓ Ease of cleansing , disinfecting and draining waste water
- ✓ Micro filter membrane to filter out pollutants
- ✓ Automatic RO membrane antiscale flushing to extend the life of the RO membrane
Also available in:
Output of Pure water : ≥ 10 L / hr.
Output of Pure water : ≥ 20 L / hr.
Output of Pure water : ≥ 30 L / hr.
Output of Pure water : ≥ 40 L / hr.
Output of Pure water : ≥ 50 L / hr.
Output of Pure water : ≥ 10 L / hr.
| TOC | < 20 ppb |
| Power | ≥ 200 W |
| Weight | 35 kg |
| Process | Single Pass RO system |
| Water Type | Type II |
| Heavy metal | < 0.01 ppm |
| Configuration | Floor Standing |
| Water Tank capacity | 80 L |
| Output of Pure water | ≥ 40 L / hr. |
| Absorbance ( 254 nm ) | ≤ 0.001 |
| Resistivity at 25 °C | 10-16 M Ω. cm |
| Conductivity at 25 °C | ≤ 10 µs / cm |
| Electrical requirements | 220 V / 50 Hz |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Reactive Silica ( SiO2 ) | < 0.01 ppm |
| Output of Ultrapure water | ≥ 1- 1.5 L / min |
Similar Products
Water Purification System LWPS-A10
✓ Water quality : One stage (Type I)
✓ Feed water : RO water /Distilled waterWater temperature: 5 ~ 40℃
Water Purification System LWPS-A11
✓ Water quality : Two stage(Type III and type I)
✓ Feed water : Tap waterTDS≤400ppmWater temperature: 5-40℃Type 3 water ≥10L/h
Water Purification System LWPS-C11
✓ Output 2nd stage RO water : 90 liters/hour
✓ Output ultrapure water : Up to 2 liters/minute (when tank is full)
