Benchtop conductivity meter LD-LBCM-A11
SKU: LD-LBCM-A11Benchtop conductivity meterLD-LBCM-A11is easy to use, it comes with 1 - 3 point calibration system for automatic recognition of the known calibration standards. The LCD display helps to view the measurements and set parameters. The temperature calibration by manual method improves the accuracy of conductivity meter. The system of conductivity meter can set up to 6 parameters like number of calibration points, cell constant etc.
- ✓ Equipped with white backlit LCD display
- ✓ 1 - 3 point calibration with automatic recognition of calibration solution
- ✓ Manual temperature compensation improves the measurement accuracy of meter
- ✓ Automatic temperature compensation for accurate measured value over the entire range
- ✓ Auto hold function freezes stable, final readings for better viewing and recording
- ✓ Reset function automatically resumes all the settings to default mode
- ✓ System menu allows setting the 6 parameters
- ✓ Automatic power off helps to reduce battery power consumption
- ✓ Help message as an operational guide for Quick access to the conductivity meter
Also available in:
Conductivity measurement range : 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm
Conductivity measurement range : 0.000 μS/cm to 3000mS/cm
Conductivity Mode :
| Power | DC 6 V / 400 mA power adapter, AC 220 V / 50Hz |
| Weight | 1.5 kg |
| Display | LCD (315 × 75 mm) |
| Connector | 6 - pin mini plug |
| Cell constant | K= 0.1, 1, 10 or User-defined |
| Temperature range | 0 to 105 °C, 32 to 221 °F |
| Data hold function | Manual or automatic |
| Temperature accuracy | ± 1° |
| Conductivity accuracy | ± 1 % F.S. |
| Temperature resolution | 0.1 °C |
| Dimension (L × W × H) | 210 × 205 × 75 mm |
| Temperature coefficient | 0.0 to 10.0 % per °C |
| Conductivity resolution | 0.01, 0.1, 1 |
| Conductivity measurement range | 0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cm |
| Conductivity calibration points | 1 - 3 points |
| Conductivity calibration solutions | 10 µS / cm , 84 µS / cm, 1413 µS / cm, 12.88 mS / cm, 111.8 mS / cm |
| Temperature compensation range & mode | Manual or automatic, 0 to 100 °C , 32 to 212 °F |
The benchtop conductivity meter is used in water quality analysis, research, education, environmental monitoring, chemicals & liquids quality testing etc. for measuring conductivity.
Similar Products
Multi parameter water quality analyzer LMWA-A10
Multi parameter water quality analyzer LMWA-A11
Multi parameter water quality analyzer LMWA-A12
✓ Wavelength Range : 190-1100 nm
✓ Optical path stability : ≤ ±0.002 Abs/h
Portable Multiparameter Water Quality Analyzer LMWA-B10
✓ Measuring Parameters : COD, Ammonia Nitrogen, pH, DO, Temperature, Conductivity, TDS, Chlorophyll, Blue-Green Algae, ORP
✓ Relative Humidity : 10 – 90% RH
