Lab-Equipment > Water-Testing > Benchtop-Dissolved-Oxygen-Meter > Pocket TDS tester LD-LPTS-A12
Features
- Selectable TDS conversion factor for accurate measurements
- 1 point push button calibration to adjust the display value to known standard
- Equipped with platinum sensor
- High TDS measurement range
- Automatic temperature compensation for accurate measured value over the entire range
- Auto hold function freezes stable, final readings for better viewing and recording
- Automatic power off helps to reduce battery power consumption
- Waterproof features guarantees protection against harsh conditions
- Replaceable electrode module to reduce the maintenance , replacement cost
Pocket TDS tester LD-LPTS-A12
Pocket TDS testerLD-LPTS-A12is equipped with platinum sensor & 1 point push button calibration system. It comes with high TDS measurement range. It is easy to use & with waterproof features design it provides protection against harsh conditions. The standard platinum sensor provides fast and reliable measuring results. Total dissolved solid content present in drinking water, waste water, swimming pool & aquarium water can be measured using pocket TDS meter.
SKU Code: LD-LPTS-A12
Also Available in below capacities
TDS range : 0.5 - 100.0 ppm
TDS range : 0.05 - 10.00 ppt
TDS range : 0 - 20 ppt
TDS range : 5 - 1000 ppm
- Specifications
- Product Applications
| Power | 3 × 1.5 V “G13A” |
| Weight | 100 g |
| Display | LCD screen |
| Connector | 6 pin |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| TDS range | 0.05 - 10.00 ppt |
| TDS factor | 0.4 to 1.0 (default 0.5) |
| Battery life | Approximately 150 hours |
| TDS accuracy | ± 1 % F.S. |
| TDS type range | High range TDS |
| Type of sensor | Platinum sensor |
| Calibration points | 1 point |
| Data hold function | Manual |
| Calibration solutions | 7447 ppm |
| Dimension (L × dia.) | 185 × 40 mm |
| Operating temperature | 0 °C - 60 °C, 32 °F - 140 °F |
| Temperature coefficient | 2 % per °C |
| Temperature compensation | 0 °C - 50 °C, Automatic |
| Normalization temperature | 25 °C |
| Pocket TDS tester is used to measure TDS content in waste water, swimming pool & aquarium, pure water, drinking water. It is also used in educational and other industrial applications for TDS measurement from test samples. |
