Lab-Equipment > Water-Testing > COD-Analyzer > Benchtop Ion meter forNO3, LD-LBIM-A29
Features
- Large LCD display
- 2 - 5 points calibration from low to high concentration
- Direct ion concentration readout for elaborate measurement process
- Selectable concentration units from ppm, mg / L, mol / L
- mV measurements to check the performance of ion selective electrode
- Temperature compensation provides accurate reading over the entire range
- Stability indicator to show current measurement status
- Calibration due reminder for regular calibration of the meter
- Auto hold function to freeze stable reading for better viewing & recording
- Automatic electrode diagnosis shows the slope of the sensor
- Reset setting function
- Expanded memory stores and recalls up to 500 readings
- Built –in real time clock stamps
- USB communication interface to transfer stored data to PC
Benchtop Ion meter forNO3, LD-LBIM-A29
Benchtop Ion meter for NO3, LD-LBIM-A29 comes with (NO3) nitrate ion selective electrode for nitrate ion concentration measurement. This Ion meter comes with 0.5 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.
SKU Code: LD-LBIM-A29
Also Available in below capacities
Ion measurement range : Cl range: 5 × 106 - 1 M, 1.8 - 35500 ppm
Ion measurement range : F range: 1 × 106M – saturation, 0.02 ppm to saturation
Ion measurement range : Na range: 1 × 105 - 1 M, 0.1 - 23000 ppm
Ion measurement range : Ca range: 5 × 107 - 1 M, 0.02 - 4000 ppm
Ion measurement range : Br range: 5 × 106 - 1 M, 0.4 - 79900 ppm
Ion measurement range : NH4 range: 5 × 106 – 1 M, 0.1 – 18000 ppm
- Specifications
- Product Applications
| Power | DC 5 V, using AC adapter, AC 220 V / 50 Hz |
| Memory | Stores up to 500 sets of data |
| Output | USB communication interface |
| Display | LCD (130 × 110 mm) |
| Weight | 1.5 kg |
| mV Range | (-1999.9) to 1999.9 mV |
| Connector | BNC |
| Power Off | Manual or automatic (10, 20, 30 minutes) |
| Resolution | 0.001, 0.01, 0.1, 1, automatic |
| mV Accuracy | ± 0.2 mV |
| mV Resolution | 0.1 mV |
| Reset Function | Yes |
| Calibration Due | 0 to 31 days |
| Compensation Mode | Manual or automatic |
| Calibration Points | 2 to 5 points |
| Data Hold Function | Manual or automatic endpoint detection |
| Stability Condition | Low or high |
| Temperature Accuracy | ± 0.5 °C, ± 0.9 °F |
| Calibration Solutions | 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L |
| Ion Measurement Range | 0.4 to 62000 ppm |
| Temperature Resolution | 0.1°C |
| Dimension (L × W × H) | 210 × 188 × 60 mm |
| Ion Measurement Accuracy | ± 0.5 % F.S. |
| Temperature Compensation | 0 to 100 °C, 32 to 212 °F |
| Temperature Measurement Range | 0 to 105 °C, 32 to 221 °F |
| Benchtop Ion meter is used to measure the cadmium ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes. |
