Lab-Equipment > Water-Testing > Conductivity-Tester > Online pH Controller LD-LOPC-A10
Features
- Equipped with industrial pH electrode
- 1 to 3 pH calibration points with ‘Automatic buffer recognition’
- ATC mode for accurate readings over entire range
- Low high alarm limits set automatically activate an external device
- Selectable temperature units °C or °F for diff. applications
- System menu allows setting of up to 9 parameters
- Reset features to resumes all setting back to default
- Manual temperature calibration improves accuracy
Online pH Controller LD-LOPC-A10
Online pH ControllerLD-LOPC-A10features 1 to 3 points pH calibration system, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. The automatic electrode slope display helps user decide when to replace the sensor.
SKU Code: LD-LOPC-A10
Also Available in below capacities
pH measurement range : 01.00 to 15.00 pH
- Specifications
- Product Applications
| Load | Max 500 |
| Power | DC 24 V |
| Weight | 350 g |
| Display | LCD |
| mV accuracy | ± 1 mV |
| pH accuracy | ± 0.01 pH |
| Signal output | 4 to 20 mA |
| mV resolution | 1 mV |
| pH resolution | 0.01 pH |
| Dimension (L*W*H) | 96 × 96 × 75 mm |
| Temperature range | 0 to 100°C , 32 to 212°F |
| pH Buffer Solutions | USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18) |
| Connection Interface | RS485 |
| Connection Terminals | Detectable screw terminals |
| Temperature accuracy | ± 1°C |
| mV measurement range | -1000 to 1000 mV |
| pH measurement range | 01.00 to 15.00 pH |
| pH calibration points | 1 to 3 points |
| Temperature resolution | 0.1°C |
| Environmental conditions | Ambient temperature to ≤ 60°C, RH ≤ 80% |
| Temperature compensation | Automatic, 0 to 100°C , 32 to 212°F |
| Low and high alarm limits | 1.00 to 10.00 pH, selectable |
| Temperature calibration range | ± 10°C |
| Temperature calibration points | 1 point |
| Used to measure pH in waste water treatment and quality inspection plants, filtration systems, RO treatment water plants, Agriculture, Aquaculture, and research industry. |
