Lab-Equipment > Water-Testing > Online-pH-Controller > Pocket Conductivity tester LD-LPCT-A12
Features
- Equipped with platinum sensor
- High conductivity range
- 1 point push button calibration to adjust the display value to known standard
- Auto hold function freezes stable, final readings for better viewing and recording
- Automatic temperature compensation for accurate measured value over the entire range
- Automatic power off helps to reduce battery power consumption
- Waterproof features guarantees protection against harsh conditions
- Replaceable electrode module to reduce the maintenance , replacement cost
Pocket Conductivity tester LD-LPCT-A12
Pocket Conductivity testerLD-LPCT-A12is equipped with platinum sensor & 1 point push button calibration system. The easy to use pocket conductivity meter comes with waterproof features design for protection against harsh conditions. Conductivity meter on the basis of its low, mid and high conductivity measurement range can be used for measuring conductivity of drinking water, waste water, brine water and liquids with high, low conductivity.
SKU Code: LD-LPCT-A12
Also Available in below capacities
Conductivity measurement range : 1.0 to 199.9 µS/cm
Conductivity measurement range : 10 to 1999 µS/cm
Conductivity measurement range : 0.1 to 19.99 mS/cm
- Specifications
- Product Applications
| Power | 3 × 1.5 V “G134” batteries |
| Weight | 100 g |
| Display | LCD screen |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Sensor type | Platinum sensor |
| Battery life | Approximately 150 hours |
| Cell constant | K=1 |
| Data hold function | Manual |
| Dimension (L*dia.) | 185 × 40 mm |
| Type of conductivity | High range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Temperature coefficient | 2 % per °C |
| Temperature compensation | 0 °C - 50 °C |
| Normalization temperature | 25 °C |
| Conductivity measurement range | 0.1 to 19.99 mS/cm |
| Conductivity calibration points | 1 point |
| Conductivity calibration solutions | 12.88 mS/cm |
| Pocket Conductivity tester on the basis of its low, mid and high conductivity measurement range can be used for testing conductivity of pure water, drinking water , waste water, brine solutions and liquids. |
